1、 Daily cleaning
Replace with new water:Check the water level of the water dispenser daily. If the cat has not finished drinking water completely within 1-2 days, especially in the season with more mosquitoes and insects in summer, it is recommended to replace it with new water to prevent bacterial growth.
Cleaning water tray and contact surface:
Using a soft cloth or sponge, combined with water or mild detergent (such as pet specific cleaning agents or diluted white vinegar), gently wipe the water tray, outlet, and other parts of the water dispenser that come into direct contact with cats.
Be careful not to use cleaning agents with irritating odors to avoid discomfort to cats.
2、 Regular deep cleaning
Power off disassembly:Before conducting a deep cleaning, be sure to disconnect the power supply of the water dispenser and follow the steps in the manual or instructional video to disassemble the water dispenser.
Clean all components:
Remove the water storage tank, water tray, filter element and other components one by one, and thoroughly clean them with clean water or mild detergent. For water storage tanks, soak them in white vinegar for a period of time (such as 15 minutes) to remove scale and bacteria.
Be careful not to use overly sharp or rough tools during the cleaning process to avoid scratching the inside of the water dispenser.
Replace the filter element:
Regularly replace the filter element based on the frequency of use and water quality of the water dispenser. It is generally recommended to replace the filter element once a month to maintain the filtering effect.
Check and clean the filtration system:
Clean the filter system components such as cotton mesh to ensure they are not clogged or damaged. If necessary, replace the filter mesh with a new one in a timely manner.
Assemble and inspect:
After cleaning and drying all components, reassemble the water dispenser according to the instructions or instructional videos.
Check if all components are installed properly to ensure there are no omissions or misalignments.
Power on test:
After assembly, turn on the power and test whether the water dispenser is running normally. Pay attention to whether there is water leakage or abnormal sound.
3、 Other maintenance suggestions
Choose a suitable placement location:Place the water dispenser in a location that is easily accessible to cats and not easily knocked over. At the same time, avoid placing the water dispenser in direct sunlight or humid environments to avoid affecting its service life.
Regular disinfection:
In addition to daily cleaning, the water dispenser can also be disinfected regularly. You can use non-toxic and almost odorless hypochlorous acid disinfectant tablets or other pet specific disinfectants for disinfection.
Pay attention to water quality:
Regularly check and understand the quality of tap water at home. If the water quality is poor, pure water or mineral water can be considered as the water source for the water dispenser.
Observe the drinking habits of cats:
Pay attention to your cat's water intake and drinking habits. If you notice a sudden decrease in your cat's water intake or abnormal behavior (such as frequent licking of the water dispenser), you should promptly check the water dispenser for any problems or consult a veterinarian for advice.
By following the above steps of cleaning and maintenance, the cleanliness, hygiene, and normal operation of the pet automatic water dispenser can be ensured, providing a healthy and safe drinking environment for cats.
